Playing the Game

I was in charge of a paving widening project in a local city. It was a Summer project, right in front of an elementary school, and was anticipated to be complete before school started. Everything was going along as planned, and even though the inspector had a tendency to be a problem on some details that were ridiculous, I felt we would be complete as anticipated. 

We were placing cement stabilized base for under the proposed new concrete paving. Even with an unmarked, and repaired, water line leak that flooded the base, I felt the base was processed as needed, graded, and after the curing time, wanted my inspector to run a density to continue. 

He arrived, ran his density, and proceeded to tell me the density was just shy of the 95 proctor. Knowing the game, and my specifications, I asked if he had placed his gauge probe into the subgrade. He had, and I explained to him the project didn't have a bid item for working the subgrade, but would be glad to stop, request a change order, and when approved, remove the base, process the subgrade, run density on the subgrade, replace the base, and get paid for the entire process. He paused a minute, thought about what I just said, and ran another density in just the base. It passed, and we started setting paving forms. 

I'd been burned in the past by similar things due to my ignorance of specifications. I learned the hard way, and refused to be rolled over by inspectors that didn't have a complete grasp of the entire picture. If I had to go to the engineer, I wouldn't hesitate. While they could beat me up with the spec book, I had the same book, and could swing with the best of them. 

We completed the project in time, it was bought within a short period of time, and after decades, the paving is holding up.